A complete residential roof inspection goes well beyond a quick visual scan from the ground. Knowing exactly what gets examined helps you understand the full picture of your roof’s condition and why each part of the inspection matters for a home in this area.
- Shingle Condition: Inspectors look for granule loss, cracking, curling edges, and missing shingles that leave your roof vulnerable to leaks, especially after windstorms common near the river valley.
- The Flashing’s Structural Integrity: Metal flashing around chimneys, vents, and valleys is checked for gaps or separation caused by repeated temperature changes through Holmen winters and springs.
- Gutters and Drainage: Gutters are inspected for debris buildup, sagging, and signs of granule accumulation, which can signal accelerated shingle wear.
- Attic Ventilation: Proper airflow in the attic helps prevent moisture buildup and reduces the risk of ice forming along the roof edge during cold stretches. Inspectors verify that vents are clear and functioning correctly.
- Moss and Algae Growth: Shaded or slower-drying roof surfaces are checked for early signs of biological growth, which the humidity around this region can encourage over time.
- Ridge Lines and Soffits: These structural parts of your roof are examined for separation, rot, or wear that could compromise the overall system.
Inspecting every one of these areas gives you a reliable picture of where your roof stands and what, if anything, needs attention before the next season arrives.
Granule Loss Tracking on Asphalt Shingles
Asphalt shingles gradually shed their protective granules over time, and the rate of loss tells us a lot about how much life your roof has left. Homes in Holmen built from the 1990s onward are at the age where this kind of wear becomes a reliable indicator of whether you’re looking at routine maintenance or a roof that’s approaching the end of its service life.
Wind Uplift and Edge Seal Inspection
The terrain near the Mississippi River valley channels wind in ways that put real pressure on shingle edges and the perimeter of your roof. We check for lifting, unsealed tabs, and separation along the edges where wind damage tends to start before it becomes visible from the ground.
Ice Dam Risk Identification
Ice dams form when heat escapes unevenly through the roof deck, causing snow to melt and refreeze at the eaves. We look at the specific conditions on your roof, including insulation gaps and ventilation patterns, that make certain areas of your home more vulnerable to this during Holmen winters.
Moisture and Biological Growth Assessment
Elevated humidity near the river valley creates conditions where moss and algae can get established on the surface of the roof faster than most homeowners realize. We check shaded areas and slower-drying sections of your roof for early-stage growth that, if left alone, can gradually break down shingle material and lead to bigger problems.